Macrame instructions for beginners.

Table of Contents

Macrame instructions for beginners. Attaching macrame threads. Do you want to learn how to macrame? Macrame knots guide free.

Fastening of threads.

Any macrame weaving begins with attaching the threads. There are several ways of attaching the threads, and each of them is appropriate for certain occasions. Sometimes items are woven from the middle of the threads to both sides. The threads are pinned to the cushion for weaving by the middle and then treads are weaved from one side, then to the other one (but beforehand turning the cushion upside down). In some situations, the threads are not even attached to the cushion, and some craftsmen work just like this. Much more often the threads should be attached to the base. So, there are a lot of macrame instructions we need to talk about.

As a base people often use a thread, a plank of wood, plastic or metal (for panels, panneau), pockets for small things, a ring for vases or cachepot, and a frame for a lampshade. The base should always be wider than the piece itself. If the plank is slippery, its ends should be fixed so that the threads do not slip off it. The base depends on the size and weight of the product: the bigger the product itself, the bigger should be its base. And for a heavy and bulky item, the base should be well fixed in a convenient place for work. Only after that, the threads are attached to it. It’s important to read about macrame instructions – they will help you in the future.

Macrame instructions for beginners. The first way of attaching threads.

The working thread is folded in half, the loop formed is placed on the base, and then the loop is folded over the base. The ends of the working thread are passed through the loop and tightened (Fig. 1).

The second way of attaching threads.

The second method of attaching is a mirror image of the first one. These two methods can be used to start creating almost any piece. The working thread is folded in half and the loop is placed under the base. The loop is brought forward and placed on the base. The ends of the thread should be pulled through the loop and tightened (Fig. 2).

Macrame instructions for beginners. The third way of attaching threads.

I have another macrame instructions for you. Remember that this is an advanced method. It is used for openwork knitting. It allows you to avoid the sprawling of a row in openwork knitting, and also it looks much neater. First, you need to attach the thread on the base using the first method. Then each end of the thread should be thrown over the base, then they should be wrapped around it so that two loops are formed, and the ends of the thread should be passed through the resulting loops and tightened (Fig. 3).

This row is denser, and the base cannot be seen through it at all. It can be made even denser by making several turns of thread.

During the first two ways of attaching the treads, threads very often are attached to the edge of the fabric for fringe weaving. This should be done with a hook. First, the edge of the fabric should be folded. Then, stepping aside from the edge by 0.5 cm, pierce the fabric from the back side with the hook and with its help pull the thread folded in half on the front side. Pull the two ends In the resulting loop and, pulling them down, tighten the loop. To make everything equal and even, before working, draw a straight line with help of a ruler, stepping aside from the edge by 0.5-1 cm.

Very long threads can be attached in the following way. Fold the thread in half, the loop should be at the top. Bend it away from you so that you have two small loops. You need to put the base into them.

Macrame instructions for beginners. The fourth way of attaching threads.

The fourth method of attaching threads

And this is almost the end of our today’s macrame instructions. This method is used when it is necessary to attach only one end of the thread to the base. The upper end of the thread is placed under the base and pinned at a distance of 2-3 cm from the base. The second end of the thread is thrown on the base on the right side of the upper end. And make one turn. Then make a second loop to the left of the upper end. Then place the lower end of the thread on the base – after that, bend it around and pass the thread through the loop formed below the base. And tighten the loop (Fig. 4).