Wire weaving tutorials free.

Table of Contents

Wire weaving tutorials free. Wire Wrapped Stone Pendant DIY. Free wire wrap tutorial step by step for beginners. Valeriy Vorobev.

Handmade jewelry

Everyone has probably tried to make simple wire crafts with their own hands. Just try to remember how you were making the improvised rings, bracelets, roses and funny little people out of wire without even knowing you were doing it. They are so easy to make from copper wire pieces or thin wire taken from a champagne bottle. Really impressive!
And if you master a few basic elements and get inspired enough, you can make copper wire crafts that will be true masterpieces!

Original jewelry pieces made by our own hands are becoming more and more popular, and that’s why today I would like to dedicate my lesson to Wire weaving tutorials free. Even for a novice master, it is not difficult to make unusual rings, exquisite pendants, deluxe lockets, original bracelets, necklaces and many other diverse and unusual jewelry. All this you can make with your own hands. You can find online Wire weaving tutorials free, buy materials and tools and create your own jewelry. That’s literally all you need to start creating.

Modern materials and technology open up an incredible number of possibilities and a huge scope for creativity. They allow everyone to participate in creating stylish and unique jewelry for yourself or as a gift to your loved ones. Later, it can even become your business.

Jewelry, made with your own design and your own hands, is not only fresh but also trendy. An example of such piece of jewelry is a pendant made of wire and stone labradorite. Such a pendant, made of stones and wire, can be made not only for yourself, but also will be great as a gift. Check out my Wire weaving tutorials free.

What kind of wire is needed to make a pendant.

For this pendant, I used nickel silver wire. You can use any other wire with a thickness of 1 mm for the base and 0.4 mm for the weaving.

We need 5 pieces of 1mm wire about 40-50 cm each. You should always have a big stock of 0.4mm thin wire. It will always come in handy.
Cabochon made of natural stone labradorite. Cabochon in the shape of a drop. I purchased it in India.

What tools do I need to make a wire pendant?

We don’t need a lot of tools. A small set of basic hand tools for working with the wire will be enough.
If you patinate and polish the wire, you will need a patination solution and a polishing tool.

First, you need to measure the cabochon. To do this, take a strip of paper and wrap it around the cabochon.

Make marks with a marker. According to this size, you need to weave wire. The weaving should be this long.

Approximately in the middle, you need to weave a weaving of five basic wires to fix the cabochon. Have a look at Basic Wire weaving patterns.

My labradorite cabochon is quite thick with sloping edges. The wire weaving will clamp it well. You just need to fix it on the back side. To do this, I didn’t weave the one bottom wire (only secured the middle and edges) so that I could then bend it on the back side.

Carefully bend the weaving of wire around the cabochon.

Connect the weavings at the top of the cabochon. You can turn the cabochon upside down if you want.

I pressed the weaving tightly against the labradorite cabochon with a slight incline. I pressed to the shape of the cabochon. That way the cabochon is safe from falling forward.

So that the cabochon does not fall back, you need to bend two wires on the back side.

Sew, staple together the two weavings at the top of the cabochon.

Next, weave two wires together by any weaving technique. You should get five pairs as a result.

The cabochon is securely fastened by weaving of wire.

You can let your imagination run wild and create your own weaving patterns. Use weaving to make a loop for a cord or chain.

You can replicate my pendant design.

On the back side we cut off the excess wire and bend the ends, so they do not cling to clothing and do not scratch your skin.

Pendant made of nickel silver wire and labradorite cabochon is done. I hope you enjoyed my Wire weaving tutorials free today. If necessary, patinate and polish the wire.

Add a chain or leather cord to the pendant.