Such a hobby as soap making has won many fans among housewives and lovers of creative leisure. Making soap is not only an exciting activity, but also a business that brings a good income. If you have long wanted to try to make soap yourself, then this article is for you. We will look at how and where to start doing soap making.
Soap making technologies
How to make a soap base from baby soap
We buy baby soap, bring it to a viscous consistency in a water bath and mix it with additives. This simple algorithm is suitable for beginners in soap making, but if you decide to do this seriously, we do not recommend you to use this method. soap making
How to cook soap from a ready-made base
For this technology, it is enough to purchase a special base in the store. This base does not contain dyes, fragrances and additives. It is either a creamy mass or a solid transparent piece of soap.
How to make soap yourself
This is the most difficult option for making soap yourself, but before you start it, you need some experience in soap making. Such soap is prepared from alkali, so this process needs to be approached with full responsibility. soap making
Materials and ingredients
Consider the second method of making soap, as the most popular and universal. soap making
Directly for the soap itself, we will need:
Special base from 300 – 400 g
Dyes
Vegetable oils
In addition, you can buy various additives and accessories that are added to the soap. For example, dried flowers, cosmetic clay, etc.
Auxiliary tools and materials:
Alcohol Sprayer
Containers for a water bath
Molds (you can take the usual baking
scales)
Instructions for a beginner soap maker
Preparatory stage
Prepare the workplace so as not to stain the table, cover it with paper or film. Put a pot of water to warm up, put a container inside in which the soap base will be cooked. When the water gets very hot (the main thing is not to bring it to a boil, otherwise you will spoil the soap), place the pre-cut soap base in a container in order to melt it. soap making
The main stage
The base should turn into a viscous mass, after that, add dyes, dried flowers, oils to it and pour into prepared molds. The outer side should be distilled from a spray bottle so that ugly bubbles do not form. Now the soap needs time to harden (25 – 30 minutes).
The final stage
We give the soap time to dry (about a day). After that, you can take it out of the molds and use soap. That’s the trick. soap making
Useful tips:
if you use plastic molds, put the soap in the refrigerator for 20 minutes, because of the sudden change in temperature, the soap will be easy to remove from the mold without damaging
if you have a microwave, you can not resort to using a water bath, in a microwave oven you can also successfully melt the soap base
Video
